Wind energy: Filament Winding Plant for the manufacture of rotor blades
Roth Composite Machinery developed a production plant for ENERCON
In close cooperation with its customer ENERCON in Aurich, Roth Composite Machinery from Steffenberg developed Filament Winding Plants for the manufacture of FRP rotor blade components for ENERCON wind turbines. The application of this technology for the manufacture of rotor blades is not quite new, however, it is an innovative procedure in comparison with the known vacuum infusion design. Due to the process reliability and the reproducibility, the material and production costs are reduced. Concurrently, a high product quality is achieved. The general tendency in the wind energy sector indicates that an increasing number of wind turbines are being installed in low-wind regions (onshore). For this application, plants with large rotor diameters are used, demanding special logistic requirements. The newly established manufacturing method enables the production of the rotor blades in segments so that they can be transported on overland routes with a small degree of efforts. Due to the innovative design of the blades and the high rate of pre-assembly in the factory, a quick on-site installation is possible. Roth Composite Machinery could get involved owing to its experience of more than 50 years in the manufacture
of Filament Winding Plants with suitable know-how for the new technology with regard to the production of rotor blades. Roth plants of this size are already used in the sector of large-scale FRP containers as well as in the aerospace industry (Vega rocket motor, Ariane 5 etc.). In search of a suitable partner for fulfilling such a demanding task, ENERCON and Roth achieved
successful results rapidly.
Layer structure of the product
The machine applies glass fibre fabrics being impregnated by epoxy resin alternately with glass rovings. In the areas of the flanges, local thickness increase is reached by mounting. In this manufacturing process, Roth combines its three core businesses filament winding, winding technology as well as impregnation. The winding process is a technologically advanced task for which Roth can refer to a wideranged wealth of experience as regards advisory services.
Machine concept: Structure of the winding machine
- drive stand for initiating the torque
- flexible tailstock for the fixture of different mandrel lengths
- tool: 3D-mandrel
- movable platforms for the impregnating process and the material application
When manufacturing products of this size, carrying the glass fibre material on a movable platform enables a nearly continuous material flow. The person operating the machine can optimally observe and control the process. Furthermore, material can be refilled without loss of time. With a rail length of almost 50 meters, components with diameters of approximately three meters and a length of about 20 meters can be produced.
Polymerization oven and demoulding process
For the further processing of the products in the polymerization oven as well as for the demoulding, Roth Composite Machinery supported its customer ENERCON regarding the concept planning and the development of solutions for the optimal production procedure.
Know-how and advisory service for the complete production process
As general contractor, Roth has the know-how for the conception of complete production processes from the filament winding technology to the demoulding. This includes recommendations for the material selection – for example the kind of fibre – as well as the detailed analysis and solutions with regard to refinement in the production process. Thereby, the product determines the manufacturing procedure. ENERCON is one of the technology leaders in the wind turbine sector for more than 30 years. Quality and innovation belong to the decisive success factors of the corporate strategy of ENERCON. A distinctive depth of production and an extended quality management system secure the high quality standards of ENERCON
additionally. With the demand to provide the customer a sophisticated product implying high-tech characteristics constantly, all ENERCON machine components are subject to a continuous development. A large team of development engineers is cooperating with different business units across the disciplines. Collectively, they set technological standards as regards next-generation plants and not least consolidate the position of ENERCON as German market leader.